AIRPURION® 300 active E T with separate control box
… stands out for its extraordinary high disinfection performance, compact construction and low energy consumption. It is manufactured in accordance with currently valid laws, standards and rules.
The device consists of a complete housing made from stain- less steel 1.4301. Wiring system and the electronic cut-in unit are integrated into the frame.
The device also includes an external control box for easy wall mounting. The system can be switched on and off at the control box. The operating status of the 3 UV lamps can also be monitored. A lamp life indicator signals when the lamp needs to be replaced.
Scope of delivery of an AIRPURION active plant also contains a mounting rack or a wire suspension.
Lamp failure or cable breaking are being internally controlled and duly signalled.
Optionally it is possible to equip the UV lamps with special coating as splinter protection. In case of lamp breakage it is ensured that no mercury can be released
The PURION UV lamps stand out for their long service life, high disinfection performance and low energy consumption. Power supply may alternatively be of 230 V/50 Hz or 110 V/60 Hz.
Its compact construction allows for an easy removal of lamps or lamp exchange, like for instance at the end of the radiator’s service life, without using any tools.
Technical data
| manufacturer | PURION GmbH |
| type | AIRPURION 300 active/silent |
| ambient air disinfection: | continuous operation |
| disinfection level of 80% | approx. 1.200 m³ room volume |
| disinfection level 88% | approx. 350 m³ room volume |
| guaranteed min. UVC Dosis during one time flow through | 175 J/m² |
| flow rate | ca. 150 m³/h active ca. 140 m³/h1 silent |
| noise level fan | 43 dB 32 dB for silent configuration |
| monitoring UV-lamps | Operating Time Counter (OTC) |
| housing dimensions length x width x height in mm | 1100 x 200 x 200 |
| weight | approx. 18 Kg |
| life time of lamps | 10.000 h |
| number of lamps | 3 |
| maximum temperature | 40°C |
| housing protection type | IP 54 |
| electrical connection total power approx. 285W | 230 V 50/60 Hz approx. 270W |
| electrical power PURION UV-lamp | approx. 3 x 90 W |
| total UVC-output | approx. 3 x 32 W (254 nm) |
| fuse protection | 10 A |
For the UV plant AIRPURION 300 active the PURION Assembly Systems are available.
> Assembly Systems
For cleaning of the immersion tube system the PURION Service KIT is recommended. > PURION Service-KIT
UV-plant AIRPURION 300 active may be used for:
- Air disinfection
Advantages:
- highest HACCP compliance via (optional) splinter protection
and monitoring of the disinfection performance - continuous operation, even if there are people staying in the room
- no bad smell or taste
- low-maintenance operation
- low operational costs
Download data-sheet: